This vehicle specific Front Runner Slimline II full Roof Rack kit includes the Slimline II tray (1255mm x 1560mm), (2) Foot Rails with table openings and a Wind Deflector.
A Slimline II full Roof Rack kit including the Slimline II tray (1255mm x 1560mm), (2) Foot Rails with table openings and a Wind Deflector.
Front Runner Foot Rail are styled to the contours of the Land Rover Range Rover Evoque and mounts the Slimline II Roof Rack securely.
These Foot Rails are fixed to the Land Rover Range Rover Evoque using the existing mounting channels on the vehicle.
Front Runner Foot Rails are easily installed and openings in the Foot Rail accommodate Front Runner tables either from the rear or side of the roof rack (Storage orientation and table size will depend on the length and width of the Rack).
THE SLIMLINE II IS STRONG.
Unlike most roof racks, the Slimline II was designed and built specifically for off-road use.
Manufactured with high density aluminum, the Front Runner Slimline II can withstand the stress of any adventure.
The load support slats fit into a double walled aluminum extrusion channel on the side profiles and are secured via locking nuts.
This patented design creates a joint support that is stronger than usual for a roof rack.
The load support slats fit into a double walled aluminum extrusion channel on the side profiles and are secured via locking nuts.
This patented design creates a joint support that is stronger than usual for a roof rack.
The Slimline IIs L-shaped rear and front slat design increases the strength of the entire rack, making the Slimline II the lightest and the strongest roof rack available.
(*the rack must always be loaded in accordance with the vehicles load rating specifications).
THE SLIMLINE II IS LIGHTWEIGHT.
?Aluminum is on average 30% lighter than steel.
The new Front Runner all aluminum Slimline II patented design offers the best strength to weight ratio of any roof rack.
The all aluminum Front Runner Slimline II can withstand greater stresses than the best all-steel roof rack at 1/3rd less the weight.
The extra strength and lightness of the Slimline II allows heavier loads to be carried on the roof of the vehicle more safely compared to comparable all-steel roof racks.
Using the lighter Slimline II Roof Rack instead of a comparable all-steel rack can lessen your vehicles environmental impact, decrease vehicle wear, and improve gas mileage.
THE SLIMLINE II IS MODULAR.
The Slimline II offers complete roof rack design flexibility.
No other roof rack available today can be assembled by the customer to meet their specific needs.
More slats can be added to create a solid platform option for sleeping and/or sitting and enjoying sundowners.
Slats can also be removed to create unobstructed access through a T-top or sunroof.
A full size rack can be quickly converted to a shorter rack with the purchase of a pair of shorter side rails.
Or a smaller rack can be made longer with the purchase of longer side rails and additional slats.
Expedition style rails can even be effortlessly added to create the classic roof rack basket shape.
If any individual component of the roof rack becomes accidentally damaged, the part can be swapped out without having to replace the entire tray.
THE SLIMLINE II IS LOW PROFILE.
Because of the unique T-slot mounting system, basket style side rails are not necessary.
This flat deck design is unobtrusive and compliments the lines of todays automobiles.
Because there are no side rails, its easier and quicker to remove stored gear and its also possible to mount a roof top tent.
For city use, the lower profile affords easier access to underground car parks and garages.
By minimizing the profile, there is less drag and noise than the typical roof rack - thereby increasing fuel efficiency and increasing performance.
To further reduce wind noise, all Front Runner Slimline II roof racks come with Wind Deflectors included.
THE SLIMLINE II IS DURABLE.
? A roof rack should last as long as your vehicle.
Most roof racks available today will rust, chip, and/or crack after being exposed to the elements.
The Front Runner Slimline II Roof Rack will take the abuse of the sun, the rain, the gear, as well as whatever condition road you drive on.
The Slimline II tray is manufactured in South Africa entirely with corrosion free aluminum while the mounting solutions are either all aluminum or stainless steel -- ensuring a lifetime of dependability.
As an extra layer of protection, all Front Runner Slimline II roof racks and mounting solutions are powder coated satin black with one of the industrys most durable and lasting finishes - Akzonobels Interpon 600 (CPO 6034).
This weather resistant powder coating is formulated for exterior uses and far exceeds industry standards, with the finish showing no visible damage at 500 hours of continuous salt spray.
THE SLIMLINE II IS VERSATILE.
The Slimline II offers easy on and off mounting for any type of adventure gear.
No more untying, unstrapping, un-netting the entire contents of your roof rack to remove one item.
The t-slot slats and slotted side rails offer complete mounting flexibility.
Loads are independently secured anywhere on the top, sides, or bottom of the rack using Front Runners unique bolt on system.
The Slimline II offers limitless possibilities for the end user to customize the arrangement of over 25 Front Runner roof rack accessories.
Front Runner offers roof top solutions for securing water, fuel, tents, bikes, braai/BBQ grates, skis, fishing rods, surfboards, axes, recovery jacks, spades/shovel, bottle openers, clothes, canoes/kayaks, lights, tables, gas/propane bottles, rescue tracks, spare tyres/tires, suitcases, chairs, potjie pots/cast iron pots and snowboards.
And if you cant find a Front Runner accessory for your particular brand of adventure -- secure whatever you like via bolts and the t-slots or try the Front Runner Tie Down Rings with the Front Runner Stratchit.
The possibilities are endless.